To maintain the shiny clean surface of 316L and 316 Stainless Steel we recommend the use of Stainless-SteelĬleaning products or a solution of lemon juice and baking powder and wiped off with soapy water. The only difference is that 316L has 0.03 max % of Carbon and 316 has 0.8 max The elements of 316L and 316 Stainless Steel are Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, The surface or the corrosion will eventually start to build up on the surface. More carbon and although is still corrosion resistant it does still need care to remove the deposits that build up on To the materials immunity from boundary carbide precipitation (sensitisation). These grades of Stainless Steel are popular for use in Coastal areas due Steel (which is why it has L after the 316). The highest grade of Stainless Steel we use is 316L Marine Grade Stainless Steel which is a low carbon version of 316 Stainless WD 40 is also useful for cleaning brass too and wipe off with soapy water. The ‘Brasso’ product is a metal polish designed to remove deposits from brass, copper, chrome, and stainless steel. To apply the liquid solution to the surface of the fitting then buff until you see the copper begin to shine. Simply dissolve salt in vinegar, then use a soft cloth With a solution of salt and vinegar to remove any excess deposits. They are ideal for coastal areas and to keep them looking pristine we recommend cleaning copper surfaces periodically Unlike rust oxidation, the copper patina is a protective barrier that retards further corrosion, to maintain copper’s TheĬolour change is the result of surface oxidation caused mainly by moisture and corrosive elements in the atmosphere. In arid climates, the colour change is usually to a nut brown. To a lovely blue-green colour or patina over time. Copper products start off with a shiny orange appearance and once installed copper weathers naturally Brass has higher malleability than bronze or zinc and is ideal for resisting corrosion including galvanic corrosionįrom saltwater. Percentage of copper yields, the higher the percentage the rosier the tone will be, and more zinc will make it appear Brass generally has a bright gold appearance dependent upon the Bronzes are mainly copper along with alloyingĮlements such as tin, aluminium, silicon, or beryllium. COPPER, BRASS & BRONZEīrass and Bronzes are families of copper-based alloys and mainly copper and zinc. Below is information on caring for the different type of products we sell. By neglecting to careįor your product may void any warranties. The outdoor environment can be harsh with very warm and hot conditions as well as extremely cold, wet, and windy conditionsĪnd more especially in coastal areas where the salt air is more concentrated causing corrosion.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |